Program > Detailed Conference Program

Week Sun. 01 Mon. 02 Tue. 03 Wed. 04 List

	Sun. 01	Mon. 02	Tue. 03	Wed. 04
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00	Registration Ice Breaker Party - Opening Gala 16:30 - 20:00 (3h30) Registration Registration at the Tipi (Patioo 32-43) 17:00 - 20:00 (3h) Ice Breaker Party - Opening Gala Tipi - Patio 32-43 https://ilass19.sciencesconf.org/data/program/IceBreakerParty_1.jpg	Welcoming talks 8:30 - 9:00 (30min) Welcoming talks Amphi 25 Jean Chambaz (President of Sorbonne University) and Stéphane Zaleski (Conference chairman) Keynote Lecture - Experimental and numerical study of primary atomization 9:00 - 9:45 (45min) Keynote Lecture - Experimental and numerical study of primary atomization Amphi 25 Raul Payri Atomizers Droplet - Numerical Droplet - Experimental 9:50 - 10:50 (1h) Atomizers 44-54 105 I - Chaouki Habchi › Large Eddy Simulation of Flashing Cryogenic Liquid with a Compressible Volume of Fluid Solver - Jan Wilhelm Gärtner, Institut für Technische Verbrennung, Universität Stuttgart 09:50-10:10 (20min) › CFD simulation of pseudo-diesel injections at high-load conditions employing the PC-SAFT EoS and VLE calculations - Carlos Rodriguez, City University London 10:10-10:30 (20min) › A comparative study of DNS of airblast atomization using CLSMOF and CLSVOF methods - Anirudh Asuri Mukundan, Complexe de recherche interprofessionnel en aérothermochimie 10:30-10:50 (20min) 9:50 - 10:50 (1h) Droplet - Numerical 44-54 107 I - ESR - Stéphane Zaleski & Daniel Fuster › NUMERICAL MODELLING OF THE TRANSITION FROM A CLOSED WALL FILM TO DISCRETE LIQUID RIVULETS - Adrian Seck, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart (ITLR) 09:50-10:10 (20min) › Impact of nanodrops on smooth surfaces with various wettabilities: splash phenomena and film dewetting - Bertrand Braeckeveldt, Laboratory of Physics of Surfaces and Interfaces, Department of Physics, University of Mons 10:10-10:30 (20min) › Numerical investigation of high-speed droplet impact using a multiscale two-fluid approach - Georgia Nykteri, City, University of London 10:30-10:50 (20min) 9:50 - 10:50 (1h) Droplet - Experimental 44-54 109 I - Grazia. Lamanna › Liquid/Liquid encapsulation: effects of wettability and miscibility - David Baumgartner, Technische Universität Graz 09:50-10:10 (20min) › On the effect of a thin liquid film on the crown propagation in drop impact studies - Grazia Lamanna, University of Stuttgart, Institute of Aerospace Thermodynamics 10:10-10:30 (20min) › Satellite drops formation during piezo-based inkjet printing - Carole Planchette, Technische Universität Graz 10:30-10:50 (20min) Coffee break 10:50 - 11:15 (25min) Coffee break Patio 44-55 Droplet - Numerical Droplet - Experimental Atomizers 11:15 - 12:55 (1h40) Droplet - Numerical 44-54 107 II - ESR - Sergei Sazhin & Lucio Araneo › An unstructured conservative level-set algorithm coupled with dynamic mesh adaptation for the computation of liquid-gas flows - Romain Janodet, CORIA 11:15-11:35 (20min) › Numerical analysis of droplets subcritical evaporation and transcritical mixing using a tabulated real-fluid thermodynamics method coupled to a homogeneous equilibrium model - Sajad JAFARI, Institut Carnot IFPEN Transports Energies, IFP Energies nouvelles 11:35-11:55 (20min) › Liquid jet and droplet deformation induced by non-uniform acoustic radiation pressure distribution - Rafael Herrera Leclerc, Complexe de recherche interprofessionnel en aérothermochimie 11:55-12:15 (20min) › From droplets to particles: Transformation criteria - Victor CHERON, Complexe de recherche interprofessionnel en aérothermochimie 12:15-12:35 (20min) › A hybrid Eulerian-Lagrangian approach for simulating liquid sprays - Fabien Evrard, Otto-von-Guericke-Universität Magdeburg 12:35-12:55 (20min) 11:15 - 12:55 (1h40) Droplet - Experimental 44-54 109 II - ESR - Ana Moita & Antonio Lozano › Study of supercooled water droplet chain evolving in a cold environment: Experimental and modelling study - Mehdi STITI, Laboratoire dÉnergétique et de Mécanique Théorique Appliquée 11:15-11:35 (20min) › Weakly nonlinear instability of a viscoelastic liquid jet - Louise COTTIER, INSA Rouen Normandie 11:35-11:55 (20min) › Insights on Bubbling Formation after Drop Impact on Thin Liquid Films - Daniela Ribeiro, LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center, University of Beira Interior [Portugal] 11:55-12:15 (20min) › LIF-thermometry with MDR-enhanced energy transfer for micro-droplet temperature imaging for varying ambient pressures - Leif Schumacher, Institute of Heat and Mass Transfer, RWTH Aachen University 12:15-12:35 (20min) › Spray-drying of oil-in-water emulsions: oil droplet break-up during the atomization by pressure-swirl atomizers - Martha Taboada, Karlsruhe Institute of Technology, Institute of Process Engineering in Life Sciences, Chair of Food Process Engineering 12:35-12:55 (20min) 11:15 - 12:55 (1h40) Atomizers 44-54 105 II - ESR - Simona Tonini & Günter Brenn › Multi-scale spray atomization model - javier anez, Complexe de recherche interprofessionnel en aérothermochimie 11:15-11:35 (20min) › Numerical and experimental investigation of pressure-swirl nozzles produced by additive manufacturing - Patrick Lüscher, Institute of Thermal and Fluid Engineering, FHNW 11:35-11:55 (20min) › Simultaneous microscopic investigation of nozzle internal flow and primary breakup using a transparent high-pressure nozzle - Valeri Kirsch, Institute of Heat and Mass Transfer RWTH Aachen University 11:55-12:15 (20min) › Numerical Simulation of Internal Flashing in a GDI Injector Nozzle - Bejoy Mandumpala Devassy, Development Engineer - Multiphase Flow 12:15-12:35 (20min) › Effect of Pressure Swirl Atomizer Geometry on Spray Performance - eslam baraya, Mechanical Power Engineering Department. Faculty of Engineering, Port Said University, Port Said 12:35-12:55 (20min) Lunch ILASS-EUROPE ACM Atomizers Droplet - Experimental Droplet - Numerical 12:55 - 14:15 (1h20) Lunch Patio 44-55 13:00 - 15:30 (2h30) ILASS-EUROPE ACM Annual Committee and A&S Editorial Board Meeting - Room Paul Germain 14:15 - 15:55 (1h40) Atomizers 44-54 105 III - Francois-Xavier Demoulin & Fabien Evrard › Internal flow characteristics in Spill-return pressure-swirl atomizers - Milan Maly, Brno University of Technology 14:15-14:35 (20min) › Atomization characteristics of a compact disc-type ultrasonic atomizer unit - Nithin J T, Indian Institute of Technology Madras - Lokesh M, Indian Institute of Technology Madras - Balasubramanian N, Indian Institute of Technology Madras - Anand T N C, Indian Institute of Technology Madras 14:35-14:55 (20min) › Droplet Sizing of electrospray based on Interferometric Laser Imaging - Azadeh Kebriaee, Sharif University of Technology - Hasan Rezaei, Sharif University of Technology 14:55-15:15 (20min) › Experimental study of the influence of the boundary conditions on the atomization process in an unconfined atmospheric burner - Raul Payri, Universitat Politecnica de Valencia 15:15-15:35 (20min) › Inert Gas Metal Atomization Using a Laval Nozzle, Preheated Gas and Radial Melt Injection - Humberto Chaves, TU-Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik 15:35-15:55 (20min) 14:15 - 15:55 (1h40) Droplet - Experimental 44-54 109 III - Louis-Marie Malbec & Christophe Dumouchel › Breakup of a surfactant-laden drop in a continuous air jet stream - Sumit Joshi, Indian Institute of Technology Madras - Sushrut Ranade, Indian Institute of Technology Madras - Anand T N C, Indian Institute of Technology Madras 14:15-14:35 (20min) › Visualization of Ethyl Alcohol Droplet Breakup with Large Deformations in a Continuously Accelerated Flow Field - Adelaida Garcia-Magariño, Instituto Nacional de Técnica Aeroespacial 14:35-14:55 (20min) › Modelling the occurrence of bouncing in droplet collision for different liquids - maohong Sui, Otto-von-Guericke-Universität Magdeburg, Multiphase Flow Systems, Institute for Process Engineering 14:55-15:15 (20min) › Investigation of Velocity and Droplet Size Distributions of Flash Boiling LN2-Jets With Phase Doppler Anemometry - Andreas Rees, Institute of Space Propulsion, German Aerospace Center (DLR) 15:15-15:35 (20min) › The Effect of Impact Angle on the Secondary Droplets at High Impact Velocity - David A. Burzynski, Technische Universität Braunschweig, Institut für Strömungsmechanik 15:35-15:55 (20min) 14:15 - 15:55 (1h40) Droplet - Numerical 44-54 107 III - ESR - Fabien Thiesset & Stéphane Popinet › Numerical simulation of primary breakup of nonturbulent liquid jets in high-viscous gaseous crossflows - Mohammad Hashemi, Department of Mechanical, Industrial and Aerospace Engineering, Concordia University 14:15-14:35 (20min) › Comparison of mapped and synthetic inflow boundary conditions in Direct Numerical Simulation of sprays - Marco Crialesi-Esposito, Universitat Politecnica de Valencia 14:35-14:55 (20min) › Simulation of light scattering and imaging of spray systems using the open-access software “Multi-Scattering” - Joakim Jönsson, Division of Combustion Physics, Department of Physics, Lund University 14:55-15:15 (20min) › On ethanol droplet evaporation in the presence of background fuel vapor - Abgail Paula Pinheiro, Federal University of Uberlândia 15:15-15:35 (20min) › Experimental and numerical study of a high-pressure waterjet - Oleg Urazmetov, Institute of Particle Process Engineering, Technische Universität Kaiserslautern 15:35-15:55 (20min) Coffee break 15:55 - 16:20 (25min) Coffee break Patio 44-55 Atomizers Droplet - Experimental Droplet - Numerical 16:20 - 18:00 (1h40) Atomizers 44-54 105 IV - Humberto Chaves & Mark Linne › Velocity Measurement of High-Pressure Gasoline Direct Injections in the Primary Atomization Region on Flash Boiling Conditions - Noritsune Kawaharada, Institute of Technical Combustion, Leibniz University Hannover 16:20-16:40 (20min) › Electrification mechanism and constituted near-electrode layers inside electrostatic atomizers - Farzad Mashayek, Department of Mechanical and Industrial Engineering, University of Illinois at Chicago 16:40-17:00 (20min) › Dynamics of liquid sheet breakup due to perforations in impingement atomization - Nikhil Kumar Etteneni, Indian Institute of Technology Tirupati 17:00-17:20 (20min) › Two-Fluid Atomization and Spray Impact - Ramona Strob, TU Dortmund University, Laboratory of Solids Process Engineering 17:20-17:40 (20min) › A 3-Phase Solver for the Simulation of Internal Nozzle Cavitating Flows in Fuel-Injectors using OpenFOAM - Jérome Helie, Contientnal Automotive France, Advanced System Engineering, Toulouse 17:40-18:00 (20min) 16:20 - 18:00 (1h40) Droplet - Experimental 44-54 109 IV - Cameron Tropea & Guillaume Castanet › On the behaviour of urea on a heated wall. A revealed Leidenfrost-like temperature during urea thermolysis. - Louis-Marie Malbec, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles 16:20-16:40 (20min) › Comparison between splash of a droplet in isolation and in a spray impact - Davood Kalantari, University of SANRU - Cameron Tropea, Technische Universität Darmstadt 16:40-17:00 (20min) › Drop impact in the regime of film boiling : transient evolution of the heat transfer and the vapor film thickness - Ophélie Caballina, Laboratoire d'Énergétique et de Mécanique Théorique Appliquée 17:00-17:20 (20min) › Time resolved thermographic characterization of heat transfer and fluid dynamics in nanofluid droplets for cooling applications - Ana Moita, Instituto Superior Tecnico Universidade de Lisboa 17:20-17:40 (20min) › A study of a single droplet impinging onto a sloped surface: Jet-Fuel and Biofuel mixtures - Inês Ferrão, LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center, University of Beira Interior [Portugal] 17:40-18:00 (20min) 16:20 - 18:00 (1h40) Droplet - Numerical 44-54 107 IV - Vincent Moureau & Katharina Warncke › A new theoretical framework for characterizing the transport of liquid in turbulent two-phase flows - Fabien Thiesset, Complexe de recherche interprofessionnel en aérothermochimie 16:20-16:40 (20min) › Selected Results of the Collaborative Research Center “Droplet Dynamics under Extreme Ambient Conditions” SFB-TRR 75 - Kathrin Schulte, Institute of Aerospace Thermodynamics, University of Stuttgart 16:40-17:00 (20min) › The International Research Training Group "Droplet Interaction Technologies" (DROPIT): Selected Results - Bernhard Weigand, Institut für Thermodynamik der Luft- und Raumfahrt - Gianpietro Elvio Cossali, University of Bergamo - Grazia Lamanna, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart - Simona Tonini, University of Bergamo 17:00-17:20 (20min) › Droplet Evaporation under High Pressure and Temperature Conditions: A Comparison of Experimental Estimations and Direct Numerical Simulations - Christoph Steinhausen, Institute of Aerospace Thermodynamics, University of Stuttgart 17:20-17:40 (20min) › Direct Numerical Simulations of Oscillating Liquid Droplets: a Method to Extract Shape Characteristics - Jonathan Reutzsch, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart (ITLR) 17:40-18:00 (20min) ILASS-EUROPE - AGM 18:15 - 19:30 (1h15) ILASS-EUROPE - AGM ILASS-EUROPE Annual General Meeting - Room 44-45 108	Keynote Lecture - Unsteady Fragmentation 9:00 - 9:45 (45min) Keynote Lecture - Unsteady Fragmentation Amphi 25 Lydia Bourouiba, Massachusetts Institute of Technology, Cambridge, USA Atomizers Internal flow Automotive 9:50 - 10:50 (1h) Atomizers 44-54 105 V - Heinz Pitsch › LP-model for ECN Spray A penetration - Ruslana Kolodnytska, Zhytomyr State Technological University 09:50-10:10 (20min) › Multi-scale simulation of the atomization of a liquid jet in cross-flow in the presence of an acoustic perturbation - Davide Zuzio, ONERA/DMPE, Université de Toulouse 10:10-10:30 (20min) › New insights in the role of turbulence for simulating primary breakup of prefilming airblast atomization - Katharina Warncke, Department of Energy and Power Plant Technology, Technische Universität Darmstadt 10:30-10:50 (20min) 9:50 - 10:50 (1h) Internal flow 44-54 109 I - Raul Payri › Linking cavitation collapse energy with the erosion incubation period - Gina M. Magnotti, Argonne National Laboratory 09:50-10:10 (20min) › Adaptive mesh interface capturing for cavitating compressible flows using Discontinuous Galerkin discretisation. - Andreas Papoutsakis, City University London 10:10-10:30 (20min) › Modelling of Liquid Oxygen Two-Phase Flow Expansion At Sub- And Supercritical Pressure Conditions - Theodoros Lyras, City University London 10:30-10:50 (20min) 9:50 - 10:50 (1h) Automotive 44-54 107 I - Internal Flow - Manolis Gavaises › Experimental cavitation and spray measurement in real-size nozzles with high-resolution neutron imaging - Lennart Thimm, Leibniz Universität Hannover [Hannover] 09:50-10:10 (20min) › Features of Internal Flow and Spray for a Multi-Hole Diesel Fuel Injector Tip - Russell Fitzgerald, Caterpillar Inc. 10:10-10:30 (20min) › CFD simulations of diesel multi-hole injector internal flow and spray jet development at increasing chamber pressure and temperature conditions - Charalambos Chasos, Frederick University 10:30-10:50 (20min) Coffee break 10:50 - 11:15 (25min) Coffee break Patio 44-55 Atomizers Droplet - Experimental Droplet - Numerical 11:15 - 12:55 (1h40) Atomizers 44-54 105 VI - Joachim Domnick & Qiaoyan Ye › Breakup simulation of a viscous liquid using a coaxial high-speed gas jet - Qiaoyan Ye, Fraunhofer Institute for Manufacturing Engineering and Automation 11:15-11:35 (20min) › Simulation of the primary breakup of non-Newtonian liquids at a high-speed rotary bell atomizer for spray painting processes using a VOF-Lagrangian Hybrid Model - Qiaoyan Ye, Fraunhofer Institute for Manufacturing Engineering and Automation 11:35-11:55 (20min) › Prediction of the hydrodynamic characteristics of 2,5-dimethylfuran fuel sprays using the moments of the droplet size distribution - Nwabueze Emekwuru, Coventry University 11:55-12:15 (20min) › Numerical and Experimental Investigations of Primary Breakup of High-Viscous Fluid at Elevated Pressure - Feichi Zhang, Karlsruhe Institute of Technology, Engler-Bunte-Institute/Division for Combustion Technology 12:15-12:35 (20min) › Comparison of spray quality for two different flow configurations: Central liquid jet versus annular liquid sheet - Simon Wachter, Karlsruhe Institute of Technology, Institute for Technical Chemistry - Tobias Jakobs, Karlsruhe Institute of Technology, Institute for Technical Chemistry - Thomas Kolb, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Karlsruhe Institute of Technology, Engler-Bunte-Institute 12:35-12:55 (20min) 11:15 - 12:55 (1h40) Droplet - Experimental 44-54 109 V - Edouard Berrocal & Marc Wittner › Spray impact on metallic meshes - Marco Marengo, School of Computing, Engineering and Mathematics 11:15-11:35 (20min) › Ceramic Pebble Production from the Break-Up of a Molten Laminar Jet - Oliver Leys, Institute for Applied Materials - Karlsruhe Institute of Technology 11:35-11:55 (20min) › The effect of injector boost current on fuel spray characteristics - Keisuke Komada, Fukuoka Institute of Technology 11:55-12:15 (20min) › Influence of droplet spatial distribution on spray evaporation - Olivier Rouzaud, ONERA, Toulouse 12:15-12:35 (20min) › Simultaneous X-ray absorption and 2-photon Laser Induced Fluorescence for single-shot imaging of the spray formation region - Edouard Berrocal, Division of Combustion Physics, Department of Physics, Lund University 12:35-12:55 (20min) 11:15 - 12:35 (1h20) Droplet - Numerical 44-54 107 V - Daniel Fuster & Daniel A. Weiss › A novel consistent momentum-conserving subgrid method for high density-ratio liquid-gas flows using the Volume-of-Fluid method for staggered grids - Sagar Pal, CNRS (UMR 7190), Univ. Pierre et Marie Curie, Institut Jean le Rond d'Alembert 11:15-11:35 (20min) › Weakly nonlinear shape oscillations of a viscous drop - Günter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology 11:35-11:55 (20min) › Measurement of colloid concentration in drops using the time-shift technique - Lingxi Li, Institute of Fluid Mechanics and Aerodynamics, Technische Universität Darmstadt 11:55-12:15 (20min) › Liquid spray injection in the expansion volume of a CO2 high voltage circuit breaker - Paolo ERRANTE, SuperGrid Institute, Laboratoire de Mécanique des Fluides et d'Acoustique 12:15-12:35 (20min) Lunch Poster Session 12:55 - 14:15 (1h20) Lunch Patio 44-55 12:55 - 14:15 (1h20) Poster Session Poster Session in Patio 44-55 Experimental techniques Automotive Combustion 14:15 - 15:35 (1h20) Experimental techniques 44-54 109 I - ESR - Christopher Powell & Guillaume Legros › Substance related investigation of the evaporation characteristics of free falling alkane-ethanol droplets using Raman spectroscopy - Thomas Hillenbrand, Chair of Engineering Thermodynamics and Transport Processes (LTTT), Bayreuth Engine Research Center (BERC), University of Bayreuth 14:15-14:35 (20min) › Development and calibration of the LASER Pattern Shift Method for measuring the lamella topology during drop impact on walls - Patrick Foltyn, Institute of Aerospace Thermodynamics, University of Stuttgart 14:35-14:55 (20min) › 3D surface reconstruction of liquid structures in sprays using structured illumination and phase demodulation - Adrian Roth, Lund University, Department of Physics, Division of Combustion Physics, Lund, Sweden 14:55-15:15 (20min) › Fragmentation of a liquid metal jet into water - Nicolas Rimbert, Laboratoire dÉnergétique et de Mécanique Théorique Appliquée 15:15-15:35 (20min) 14:15 - 15:55 (1h40) Automotive 44-54 107 II - ESR - Camille Hespel & Chaouki Habchi › Effect of Diesel injection pressures up to 450MPa on in-nozzle flow using realistic multicomponent surrogates - Alvaro Vidal, City University London 14:15-14:35 (20min) › Spray characteristics of air-assisted urea-SCR sprays of sub-atmospheric temperatures - Aniket P. Kulkarni, College of Engineering Design and Physical Sciences, Brunel University London, 14:35-14:55 (20min) › Locally variable turbulent Prandtl number considerations on the modeling of liquid rocket engines operating above the critical point - Leandro Magalhães, University of Beira Interior [Portugal], LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center 14:55-15:15 (20min) › Spray-wall interaction: study of preferential vaporization of fuel film as function of injection pressure and wall temperature - Anthony Oswaldo Roque Ccacya, Université dÓrléans 15:15-15:35 (20min) › Evaluation of breakup models for marine diesel spray simulations - Haohan Li, Ghent University 15:35-15:55 (20min) 14:15 - 15:55 (1h40) Combustion 44-54 105 I - ESR- Gilles Bruneaux & Christine Mounaïm-Rousselle › Comparison of the spray combustion characteristics of octanal and diesel - Irene Ruiz, Brunel University London 14:15-14:35 (20min) › Multi-scale powder dispersal solution using the General Dynamic Equation - Amir Shalel, Safety and Management Engineering Unit, Ben-Gurion University of the Negev 14:35-15:55 (1h20) › Influence of precursor concentration on spray and particle formation in flame spray pyrolysis - Malte Bieber, Institute of Heat and Mass Transfer, RWTH Aachen University 14:55-15:15 (20min) › Study about the influence of an automatic meshing algorithm on numerical simulations of a gaseous-fueled Lean Direct Injection (LDI) gas turbine combustor in non-reactive conditions - Mario Belmar-Gil, Universitat Politècnica de València 15:15-15:35 (20min) Coffee break 15:55 - 16:20 (25min) Coffee break Patio 44-55 Atomizers Droplet - Numerical Atmospheric, agricultural and medical sprays Chairmans' Award Committee 16:20 - 17:40 (1h20) Atomizers 44-54 105 VII - Marco Marengo & Davide Zuzio › Increasing the Predictive Character of Spray Process Simulation by Multiphase Model Transitioning - Jochen Schütze, ANSYS Germany GmbH 16:20-16:40 (20min) › X-ray Characterization and Spray Measurements of ECN Spray G Using Alternative Fuels at Flashing Conditions - Brandon Sforzo, Argonne National Laboratory 17:20-17:40 (20min) 16:20 - 17:40 (1h20) Droplet - Numerical 44-54 107 VI - Stéphane Popinet & Nicolas Rimbert › Analytical modelling of heating and evaporation of drop clouds with temperature dependent gas properties - Simona Tonini, University of Bergamo 16:20-16:40 (20min) › Recent developments in gas-droplet flow simulations based on the Fully Lagrangian Approach - Oyuna Rybdylova, School of Computing, Engineering and Mathematics 16:40-17:00 (20min) › New approaches to hydrodynamic modelling of the heating and evaporation of droplets and liquid films - Sergei Sazhin, University of Brighton 17:00-17:20 (20min) › Direct numerical simulation of drop impact on superhydrophobic patterned surfaces using the VoF method - Martina Baggio, University of Stuttgart 17:20-17:40 (20min) 16:20 - 17:40 (1h20) Atmospheric, agricultural and medical sprays 44-54 109 Volfango Bertola & Nwabueze Emekwuru › Atomization of two colliding micro liquid jets in a respiratory inhaler: A computational study - Mahdi Saeedipour, Johannes Kepler University Linz [linz] 16:20-16:40 (20min) › Influence of coaxial nozzle design on atomization of cell suspensions and cell survival rate - Georg Möller, Institute of Heat and Mass Transfer, RWTH Aachen University 16:40-17:00 (20min) › Self-similar flow field of consumer sprays - Hannes Hinterbichler, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology 17:00-17:20 (20min) › A modified Young-Laplace approach to dynamic wetting of dilute polymer solutions - Volfango Bertola, Laboratory of Technical Physics, School of Engineering, University of Liverpool 17:20-17:40 (20min) 17:00 - 18:30 (1h30) Chairmans' Award Committee Award for Best Presentation/Paper (Room Paul Germain) Gala Dinner 19:00 - 23:00 (4h) Gala Dinner https://ilass19.sciencesconf.org/data/program/GalaDinner_1.jpg	Keynote Lecture - From Fuel to Power (and Emissions): A numerical journey though automotive injection and combustion systems 9:00 - 9:45 (45min) Keynote Lecture - From Fuel to Power (and Emissions): A numerical journey though automotive injection and combustion systems Amphi 25 Heinz Pitsch, Institut für Technische Verbrennung, RWTH Aachen University, Aachen, Germany Atomizers Droplet - Numerical Experimental techniques 9:50 - 10:50 (1h) Atomizers 44-54 105 VIII - Eran Sher › Nucleation inception temperature in boiling due to rapid heating - A universal correlation - Tali Bar-Kohany, Tel-Aviv University& nrcn - Yarden Amsalem, Tel-Aviv University& nrcn 09:50-10:10 (20min) › Criteria for Homogeneous Flash Boiling Atomization: An Experimental Approach - Yahav Moshkovich, Technion - Israel Institute of Technology [Haifa] 10:10-10:30 (20min) › Experimental study of the dispersion of a fire suppression agent through a real size nozzle of an aircraft cargo cabin extinguisher system - Pedro Marti-Aldaravi, Universitat Politecnica de Valencia 10:30-10:50 (20min) 9:50 - 10:50 (1h) Droplet - Numerical 44-54 107 VII - Christophe Dumouchel › Coupled Level set moment of fluid method for simulating multiphase flows - Anirudh Asuri Mukundan, Complexe de recherche interprofessionnel en aérothermochimie 09:50-10:10 (20min) › Multiple fuel droplets evaporation effects on ambient conditions - João Marcelo Vedovoto, Federal University of Uberlândia 10:10-10:30 (20min) › Investigation of vorticity production mechanisms in liquid atomization processes - daniel fuster, Institut D'Alembert 10:30-10:50 (20min) 9:50 - 10:30 (40min) Experimental techniques 44-54 109 II - Jan Jedelsky › Uncertainty Assessment of Calibrated Structured Planar LIF/Mie Ratio-metric Imaging - Andrew Corber, National Research Council of Canada - Patrizio Vena, National Research Council of Canada - Wajid Chishty, National Research Council of Canada 09:50-10:10 (20min) › Spray Visualization of an Urea Injector in the Deposit Tests of a Heavy-duty ATS System - HANDE BEZCI ZEREN, Ford OTOSAN 10:10-10:30 (20min) Coffee break 10:50 - 11:15 (25min) Coffee break Patio 44-55 Droplet - Numerical Automotive Exibitors presentations 11:15 - 12:55 (1h40) Droplet - Numerical 44-54 107 VIII - Udo Fritsching & Jérôme Hélie › Viscous droplet breakup in narrow pore systems - Tobias Wollborn, Leibniz Institute for Materials Engineering - IWT; Particles and Process Engineering, University of Bremen 11:15-11:35 (20min) › Probing liquid atomization using probability density functions, volume-based scale distributions and differential geometry - Fabien Thiesset, Complexe de recherche interprofessionnel en aérothermochimie 11:35-11:55 (20min) › Numerical Simulation of Droplet Breakup when Impacting a Narrow Gap - Anastasios Georgoulas, Advanced Engineering Centre, School of Computing Engineering and Mathematics, University of Brighton 11:55-12:15 (20min) › Understanding encapsulation: a simplified approach using drop impact onto a solid sphere - Marco Marengo, School of Computing, Engineering and Mathematics 12:15-12:35 (20min) › A multi-component real-fluid two-phase flow solver with high-order finite-difference schemes - jianhang wang, IFP Energies nouvelles, Technical University of Munich - Songzhi Yang, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles - Chaouki Habchi, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles 12:35-12:55 (20min) 11:15 - 12:55 (1h40) Automotive 44-54 105 III - Frederic Ravet & Russell Fitzgerald › Atomization of a G-DI spray with air dissolved in gasoline and mono-component fuels - Lucio Araneo, Politecnico di Milano [Milan] 11:15-11:35 (20min) › Spray cone angle prediction model considering nozzle hole geometry - Ibrahim Najar, Chair of Piston Machines and Internal Combustion Engines, Rostock University 11:35-11:55 (20min) › effect of butanol and ABE blend on PRF80 spray behavior - Christine MOUNAÏM-ROUSSELLE, Laboratoire PRISME 11:55-12:15 (20min) › Study on the Spray Dynamics and Sectional Spray Distribution using Spray Pattern Measurement of Multi-Hole GDI Injector - Jeonghyun Park, Graduate School of Chonnam National University 12:35-12:55 (20min) 11:15 - 12:55 (1h40) Exibitors presentations 44-54 109 DANTEC, LAVISION, OXFORD LASER, TSI, A2 https://ilass19.sciencesconf.org/data/program/prog_exhibitors.pdf Lunch 12:55 - 14:15 (1h20) Lunch Patio 44-55 Atomizers Automotive Combustion 14:15 - 15:35 (1h20) Atomizers 44-54 107 IX - Jean-Bernard Blaisot & Alessandro Montanaro › Real-size Real-shape Real-pressure transparent nozzles to contribute to nozzle design and cavitation control for GDI - jerome helie, CPT France SAS 14:15-14:35 (20min) › Towards lattice Boltzmann simulation of flow dynamics inside a model fuel injector: a first-stage study - TIANPEI LUO, Beijing Engineering Research Center of Aerospace Testing Technology and Equipment, Beijing 100074, China, Department of Mechanical and Aerospace Engineering & Institute of Energy Futures, Brunel University London, Uxbridge UB8 3PH, UK, Beijing Institute of Aerospace Testing Technology, Beijing 100074, China 14:35-14:55 (20min) › Entropy-based cavitation and primary atomization analysis with a 2D transparent injector - Jean-Bernard Blaisot, Complexe de recherche interprofessionnel en aérothermochimie 14:55-15:15 (20min) › Experimental investigation of spillback nozzle performance via pulsating LED shadowgraphy. - Giovanni Cafaggi, DTU Chemical Engineering 15:15-15:35 (20min) 14:15 - 15:55 (1h40) Automotive 44-54 109 IV - João Marcelo Vedovoto & Robert M. Mcdavid › Very High-Pressure Sprays of Gasoline from a GDI Multi-hole Injector - Alessandro Montanaro, Istituto Motori, National Research Council 14:15-14:35 (20min) › Large-eddy simulation of turbulent cavitating flow in a Diesel injector including needle movement, in OpenFOAM® - KONSTANTINOS KOLOVOS, 1Perkins Engines Company Ltd 14:35-14:55 (20min) › A Methodology for the hydraulic characterization of a Urea-Water Solution injector by means of Spray Momentum Measurement - Raul Payri, Universitat Politecnica de Valencia 14:55-15:15 (20min) › 3D Measurements of the Geometry, Internal Flow and Emerging Fuel Jet from the ECN Spray C Injector - Christopher Powell, Argonne National Laboratory 15:15-15:35 (20min) › Large eddy simulation of high-pressure ECN Spray A with the focus on the influence of injection pressure - Fatemeh Salehi, School of Engineering, Macquarie University 15:35-15:55 (20min) 14:15 - 15:35 (1h20) Combustion 44-54 105 II - Eva Gutheil & Salvador Navarro-Martinez › Effect of Spray Bulging on Ignition of High Pressure Diesel Sprays - Madan Mohan Avulapati, Indian Institute of Technology Tirupati 14:15-14:35 (20min) › Study on large-scale ignition in flame spread of randomly distributed droplet cloud near group-combustion-excitation limit in microgravity - kodai matsumoto, Graduate School of Sciences and Technology for Innovation, Yamaguchi University 14:35-14:55 (20min) › Closure of the Scalar Dissipation Rate in the Spray Flamelet Equations - Hernan Olguin, Universidad Tecnica Federico Santa Maria [Valparaiso] 15:15-15:35 (20min) Coffee break 15:55 - 16:20 (25min) Coffee break Patio 44-55 Atomizers Automotive 16:20 - 17:40 (1h20) Atomizers 44-54 107 X - Raffaele Ragucci & Daniel Fuster › Enhancement of the Madabhushi Liquid Jet in Crossflow Breakup Model by a Ligament Breakup Mechanism - Markus Lambert, ANSYS Germany GmbH 16:20-16:40 (20min) › A surface resolution criterion for two-phase flows DNS - Romain Canu, COmplexe de Recherche Interprofessionnel en Aérothermochimie 17:00-17:20 (20min) › Large Eddy Simulation of Multi-Component Mixing Layers at High-Pressure Conditions - Dennis Kuetemeier, Technische Universität Darmstadt, Energy and Power Plant Technology 17:20-17:40 (20min) 16:20 - 17:40 (1h20) Automotive 44-54 109 V - Guillaume Legros & Fabrice Lemoine › Impact of multiple injections on adBlue Spray Decomposition in a SCR-like system using Large Eddy Simulation - Kaushal Nishad, Institute of Energy and Power Plant Technology, Technische Universität Darmstadt, 16:20-16:40 (20min) › Characterization of Air Entrainment and Mixture Formation Processes of Multi-Hole Injector Spray for Diesel Engine: Comparison with Single-Hole Injector - Shinichi Kakami, Department of Mechanical System 16:40-17:00 (20min) › Experimental Investigation of the Effect of Surface Geometry on Spray Impingement and Its Macroscopic Behaviour - Christoph Steinberg, Shanghai Jiao Tong University [Shanghai] 17:00-17:20 (20min) › A novel discrete phase solver for high-speed spray simulations in industrial applications - Marcel Divis, Ricardo Software, Ricardo Prague s.r.o 17:20-17:40 (20min) › Propane/diesel mixed fuels spray angle investigation in the near-nozzle field via high-speed imaging - Luigi Sequino, ISTITUTO MOTORI - CNR 17:20-17:40 (20min)

Online user: 60

RSS Feed