Sunday, September 1, 2019

Time Event  
16:30 - 20:00 Registration - Registration at the Tipi (Patioo 32-43)  
17:00 - 20:00 Ice Breaker Party - Opening Gala
 

Monday, September 2, 2019

Time Event  
08:30 - 09:00 Welcoming talks - Jean Chambaz (President of Sorbonne University) and Stéphane Zaleski (Conference chairman)  
09:00 - 09:45 Keynote Lecture - Experimental and numerical study of primary atomization - Raul Payri  
09:50 - 10:50 Atomizers - I - Chaouki Habchi  
09:50 - 10:10 › Large Eddy Simulation of Flashing Cryogenic Liquid with a Compressible Volume of Fluid Solver - Jan Wilhelm Gärtner, Institut für Technische Verbrennung, Universität Stuttgart  
10:10 - 10:30 › CFD simulation of pseudo-diesel injections at high-load conditions employing the PC-SAFT EoS and VLE calculations - Carlos Rodriguez, City University London  
10:30 - 10:50 › A comparative study of DNS of airblast atomization using CLSMOF and CLSVOF methods - Anirudh Asuri Mukundan, Complexe de recherche interprofessionnel en aérothermochimie  
09:50 - 10:50 Droplet - Numerical - I - ESR - Stéphane Zaleski & Daniel Fuster  
09:50 - 10:10 › NUMERICAL MODELLING OF THE TRANSITION FROM A CLOSED WALL FILM TO DISCRETE LIQUID RIVULETS - Adrian Seck, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart (ITLR)  
10:10 - 10:30 › Impact of nanodrops on smooth surfaces with various wettabilities: splash phenomena and film dewetting - Bertrand Braeckeveldt, Laboratory of Physics of Surfaces and Interfaces, Department of Physics, University of Mons  
10:30 - 10:50 › Numerical investigation of high-speed droplet impact using a multiscale two-fluid approach - Georgia Nykteri, City, University of London  
09:50 - 10:50 Droplet - Experimental - I - Grazia. Lamanna  
09:50 - 10:10 › Liquid/Liquid encapsulation: effects of wettability and miscibility - David Baumgartner, Technische Universität Graz  
10:10 - 10:30 › On the effect of a thin liquid film on the crown propagation in drop impact studies - Grazia Lamanna, University of Stuttgart, Institute of Aerospace Thermodynamics  
10:30 - 10:50 › Satellite drops formation during piezo-based inkjet printing - Carole Planchette, Technische Universität Graz  
10:50 - 11:15 Coffee break  
11:15 - 12:55 Droplet - Numerical - II - ESR - Sergei Sazhin & Lucio Araneo  
11:15 - 11:35 › An unstructured conservative level-set algorithm coupled with dynamic mesh adaptation for the computation of liquid-gas flows - Romain Janodet, CORIA  
11:35 - 11:55 › Numerical analysis of droplets subcritical evaporation and transcritical mixing using a tabulated real-fluid thermodynamics method coupled to a homogeneous equilibrium model - Sajad JAFARI, Institut Carnot IFPEN Transports Energies, IFP Energies nouvelles  
11:55 - 12:15 › Liquid jet and droplet deformation induced by non-uniform acoustic radiation pressure distribution - Rafael Herrera Leclerc, Complexe de recherche interprofessionnel en aérothermochimie  
12:15 - 12:35 › From droplets to particles: Transformation criteria - Victor CHERON, Complexe de recherche interprofessionnel en aérothermochimie  
12:35 - 12:55 › A hybrid Eulerian-Lagrangian approach for simulating liquid sprays - Fabien Evrard, Otto-von-Guericke-Universität Magdeburg  
11:15 - 12:55 Droplet - Experimental - II - ESR - Ana Moita & Antonio Lozano  
11:15 - 11:35 › Study of supercooled water droplet chain evolving in a cold environment: Experimental and modelling study - Mehdi STITI, Laboratoire dÉnergétique et de Mécanique Théorique Appliquée  
11:35 - 11:55 › Weakly nonlinear instability of a viscoelastic liquid jet - Louise COTTIER, INSA Rouen Normandie  
11:55 - 12:15 › Insights on Bubbling Formation after Drop Impact on Thin Liquid Films - Daniela Ribeiro, LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center, University of Beira Interior [Portugal]  
12:15 - 12:35 › LIF-thermometry with MDR-enhanced energy transfer for micro-droplet temperature imaging for varying ambient pressures - Leif Schumacher, Institute of Heat and Mass Transfer, RWTH Aachen University  
12:35 - 12:55 › Spray-drying of oil-in-water emulsions: oil droplet break-up during the atomization by pressure-swirl atomizers - Martha Taboada, Karlsruhe Institute of Technology, Institute of Process Engineering in Life Sciences, Chair of Food Process Engineering  
11:15 - 12:55 Atomizers - II - ESR - Simona Tonini & Günter Brenn  
11:15 - 11:35 › Multi-scale spray atomization model - javier anez, Complexe de recherche interprofessionnel en aérothermochimie  
11:35 - 11:55 › Numerical and experimental investigation of pressure-swirl nozzles produced by additive manufacturing - Patrick Lüscher, Institute of Thermal and Fluid Engineering, FHNW  
11:55 - 12:15 › Simultaneous microscopic investigation of nozzle internal flow and primary breakup using a transparent high-pressure nozzle - Valeri Kirsch, Institute of Heat and Mass Transfer RWTH Aachen University  
12:15 - 12:35 › Numerical Simulation of Internal Flashing in a GDI Injector Nozzle - Bejoy Mandumpala Devassy, Development Engineer - Multiphase Flow  
12:35 - 12:55 › Effect of Pressure Swirl Atomizer Geometry on Spray Performance - eslam baraya, Mechanical Power Engineering Department. Faculty of Engineering, Port Said University, Port Said  
12:55 - 14:15 Lunch  
13:00 - 15:30 ILASS-EUROPE ACM - Annual Committee and A&S Editorial Board Meeting - Room Paul Germain  
14:15 - 15:55 Atomizers - III - Francois-Xavier Demoulin & Fabien Evrard  
14:15 - 14:35 › Internal flow characteristics in Spill-return pressure-swirl atomizers - Milan Maly, Brno University of Technology  
14:35 - 14:55 › Atomization characteristics of a compact disc-type ultrasonic atomizer unit - Nithin J T, Indian Institute of Technology Madras - Lokesh M, Indian Institute of Technology Madras - Balasubramanian N, Indian Institute of Technology Madras - Anand T N C, Indian Institute of Technology Madras  
14:55 - 15:15 › Droplet Sizing of electrospray based on Interferometric Laser Imaging - Azadeh Kebriaee, Sharif University of Technology - Hasan Rezaei, Sharif University of Technology  
15:15 - 15:35 › Experimental study of the influence of the boundary conditions on the atomization process in an unconfined atmospheric burner - Raul Payri, Universitat Politecnica de Valencia  
15:35 - 15:55 › Inert Gas Metal Atomization Using a Laval Nozzle, Preheated Gas and Radial Melt Injection - Humberto Chaves, TU-Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik  
14:15 - 15:55 Droplet - Experimental - III - Louis-Marie Malbec & Christophe Dumouchel  
14:15 - 14:35 › Breakup of a surfactant-laden drop in a continuous air jet stream - Sumit Joshi, Indian Institute of Technology Madras - Sushrut Ranade, Indian Institute of Technology Madras - Anand T N C, Indian Institute of Technology Madras  
14:35 - 14:55 › Visualization of Ethyl Alcohol Droplet Breakup with Large Deformations in a Continuously Accelerated Flow Field - Adelaida Garcia-Magariño, Instituto Nacional de Técnica Aeroespacial  
14:55 - 15:15 › Modelling the occurrence of bouncing in droplet collision for different liquids - maohong Sui, Otto-von-Guericke-Universität Magdeburg, Multiphase Flow Systems, Institute for Process Engineering  
15:15 - 15:35 › Investigation of Velocity and Droplet Size Distributions of Flash Boiling LN2-Jets With Phase Doppler Anemometry - Andreas Rees, Institute of Space Propulsion, German Aerospace Center (DLR)  
15:35 - 15:55 › The Effect of Impact Angle on the Secondary Droplets at High Impact Velocity - David A. Burzynski, Technische Universität Braunschweig, Institut für Strömungsmechanik  
14:15 - 15:55 Droplet - Numerical - III - ESR - Fabien Thiesset & Stéphane Popinet  
14:15 - 14:35 › Numerical simulation of primary breakup of nonturbulent liquid jets in high-viscous gaseous crossflows - Mohammad Hashemi, Department of Mechanical, Industrial and Aerospace Engineering, Concordia University  
14:35 - 14:55 › Comparison of mapped and synthetic inflow boundary conditions in Direct Numerical Simulation of sprays - Marco Crialesi-Esposito, Universitat Politecnica de Valencia  
14:55 - 15:15 › Simulation of light scattering and imaging of spray systems using the open-access software “Multi-Scattering” - Joakim Jönsson, Division of Combustion Physics, Department of Physics, Lund University  
15:15 - 15:35 › On ethanol droplet evaporation in the presence of background fuel vapor - Abgail Paula Pinheiro, Federal University of Uberlândia  
15:35 - 15:55 › Experimental and numerical study of a high-pressure waterjet - Oleg Urazmetov, Institute of Particle Process Engineering, Technische Universität Kaiserslautern  
15:55 - 16:20 Coffee break  
16:20 - 18:00 Atomizers - IV - Humberto Chaves & Mark Linne  
16:20 - 16:40 › Velocity Measurement of High-Pressure Gasoline Direct Injections in the Primary Atomization Region on Flash Boiling Conditions - Noritsune Kawaharada, Institute of Technical Combustion, Leibniz University Hannover  
16:40 - 17:00 › Electrification mechanism and constituted near-electrode layers inside electrostatic atomizers - Farzad Mashayek, Department of Mechanical and Industrial Engineering, University of Illinois at Chicago  
17:00 - 17:20 › Dynamics of liquid sheet breakup due to perforations in impingement atomization - Nikhil Kumar Etteneni, Indian Institute of Technology Tirupati  
17:20 - 17:40 › Two-Fluid Atomization and Spray Impact - Ramona Strob, TU Dortmund University, Laboratory of Solids Process Engineering  
17:40 - 18:00 › A 3-Phase Solver for the Simulation of Internal Nozzle Cavitating Flows in Fuel-Injectors using OpenFOAM - Jérome Helie, Contientnal Automotive France, Advanced System Engineering, Toulouse  
16:20 - 18:00 Droplet - Experimental - IV - Cameron Tropea & Guillaume Castanet  
16:20 - 16:40 › On the behaviour of urea on a heated wall. A revealed Leidenfrost-like temperature during urea thermolysis. - Louis-Marie Malbec, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles  
16:40 - 17:00 › Comparison between splash of a droplet in isolation and in a spray impact - Davood Kalantari, University of SANRU - Cameron Tropea, Technische Universität Darmstadt  
17:00 - 17:20 › Drop impact in the regime of film boiling : transient evolution of the heat transfer and the vapor film thickness - Ophélie Caballina, Laboratoire d'Énergétique et de Mécanique Théorique Appliquée  
17:20 - 17:40 › Time resolved thermographic characterization of heat transfer and fluid dynamics in nanofluid droplets for cooling applications - Ana Moita, Instituto Superior Tecnico Universidade de Lisboa  
17:40 - 18:00 › A study of a single droplet impinging onto a sloped surface: Jet-Fuel and Biofuel mixtures - Inês Ferrão, LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center, University of Beira Interior [Portugal]  
16:20 - 18:00 Droplet - Numerical - IV - Vincent Moureau & Katharina Warncke  
16:20 - 16:40 › A new theoretical framework for characterizing the transport of liquid in turbulent two-phase flows - Fabien Thiesset, Complexe de recherche interprofessionnel en aérothermochimie  
16:40 - 17:00 › Selected Results of the Collaborative Research Center “Droplet Dynamics under Extreme Ambient Conditions” SFB-TRR 75 - Kathrin Schulte, Institute of Aerospace Thermodynamics, University of Stuttgart  
17:00 - 17:20 › The International Research Training Group "Droplet Interaction Technologies" (DROPIT): Selected Results - Bernhard Weigand, Institut für Thermodynamik der Luft- und Raumfahrt - Gianpietro Elvio Cossali, University of Bergamo - Grazia Lamanna, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart - Simona Tonini, University of Bergamo  
17:20 - 17:40 › Droplet Evaporation under High Pressure and Temperature Conditions: A Comparison of Experimental Estimations and Direct Numerical Simulations - Christoph Steinhausen, Institute of Aerospace Thermodynamics, University of Stuttgart  
17:40 - 18:00 › Direct Numerical Simulations of Oscillating Liquid Droplets: a Method to Extract Shape Characteristics - Jonathan Reutzsch, Institut für Thermodynamik der Luft- und Raumfahrt, Universität Stuttgart (ITLR)  
18:15 - 19:30 ILASS-EUROPE - AGM - ILASS-EUROPE Annual General Meeting - Room 44-45 108  

Tuesday, September 3, 2019

Time Event  
09:00 - 09:45 Keynote Lecture - Unsteady Fragmentation - Lydia Bourouiba, Massachusetts Institute of Technology, Cambridge, USA  
09:50 - 10:50 Atomizers - V - Heinz Pitsch  
09:50 - 10:10 › LP-model for ECN Spray A penetration - Ruslana Kolodnytska, Zhytomyr State Technological University  
10:10 - 10:30 › Multi-scale simulation of the atomization of a liquid jet in cross-flow in the presence of an acoustic perturbation - Davide Zuzio, ONERA/DMPE, Université de Toulouse  
10:30 - 10:50 › New insights in the role of turbulence for simulating primary breakup of prefilming airblast atomization - Katharina Warncke, Department of Energy and Power Plant Technology, Technische Universität Darmstadt  
09:50 - 10:50 Internal flow - I - Raul Payri  
09:50 - 10:10 › Linking cavitation collapse energy with the erosion incubation period - Gina M. Magnotti, Argonne National Laboratory  
10:10 - 10:30 › Adaptive mesh interface capturing for cavitating compressible flows using Discontinuous Galerkin discretisation. - Andreas Papoutsakis, City University London  
10:30 - 10:50 › Modelling of Liquid Oxygen Two-Phase Flow Expansion At Sub- And Supercritical Pressure Conditions - Theodoros Lyras, City University London  
09:50 - 10:50 Automotive - I - Internal Flow - Manolis Gavaises  
09:50 - 10:10 › Experimental cavitation and spray measurement in real-size nozzles with high-resolution neutron imaging - Lennart Thimm, Leibniz Universität Hannover [Hannover]  
10:10 - 10:30 › Features of Internal Flow and Spray for a Multi-Hole Diesel Fuel Injector Tip - Russell Fitzgerald, Caterpillar Inc.  
10:30 - 10:50 › CFD simulations of diesel multi-hole injector internal flow and spray jet development at increasing chamber pressure and temperature conditions - Charalambos Chasos, Frederick University  
10:50 - 11:15 Coffee break  
11:15 - 12:55 Atomizers - VI - Joachim Domnick & Qiaoyan Ye  
11:15 - 11:35 › Breakup simulation of a viscous liquid using a coaxial high-speed gas jet - Qiaoyan Ye, Fraunhofer Institute for Manufacturing Engineering and Automation  
11:35 - 11:55 › Simulation of the primary breakup of non-Newtonian liquids at a high-speed rotary bell atomizer for spray painting processes using a VOF-Lagrangian Hybrid Model - Qiaoyan Ye, Fraunhofer Institute for Manufacturing Engineering and Automation  
11:55 - 12:15 › Prediction of the hydrodynamic characteristics of 2,5-dimethylfuran fuel sprays using the moments of the droplet size distribution - Nwabueze Emekwuru, Coventry University  
12:15 - 12:35 › Numerical and Experimental Investigations of Primary Breakup of High-Viscous Fluid at Elevated Pressure - Feichi Zhang, Karlsruhe Institute of Technology, Engler-Bunte-Institute/Division for Combustion Technology  
12:35 - 12:55 › Comparison of spray quality for two different flow configurations: Central liquid jet versus annular liquid sheet - Simon Wachter, Karlsruhe Institute of Technology, Institute for Technical Chemistry - Tobias Jakobs, Karlsruhe Institute of Technology, Institute for Technical Chemistry - Thomas Kolb, Karlsruhe Institute of Technology, Institute for Technical Chemistry, Karlsruhe Institute of Technology, Engler-Bunte-Institute  
11:15 - 12:55 Droplet - Experimental - V - Edouard Berrocal & Marc Wittner  
11:15 - 11:35 › Spray impact on metallic meshes - Marco Marengo, School of Computing, Engineering and Mathematics  
11:35 - 11:55 › Ceramic Pebble Production from the Break-Up of a Molten Laminar Jet - Oliver Leys, Institute for Applied Materials - Karlsruhe Institute of Technology  
11:55 - 12:15 › The effect of injector boost current on fuel spray characteristics - Keisuke Komada, Fukuoka Institute of Technology  
12:15 - 12:35 › Influence of droplet spatial distribution on spray evaporation - Olivier Rouzaud, ONERA, Toulouse  
12:35 - 12:55 › Simultaneous X-ray absorption and 2-photon Laser Induced Fluorescence for single-shot imaging of the spray formation region - Edouard Berrocal, Division of Combustion Physics, Department of Physics, Lund University  
11:15 - 12:35 Droplet - Numerical - V - Daniel Fuster & Daniel A. Weiss  
11:15 - 11:35 › A novel consistent momentum-conserving subgrid method for high density-ratio liquid-gas flows using the Volume-of-Fluid method for staggered grids - Sagar Pal, CNRS (UMR 7190), Univ. Pierre et Marie Curie, Institut Jean le Rond d'Alembert  
11:35 - 11:55 › Weakly nonlinear shape oscillations of a viscous drop - Günter Brenn, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology  
11:55 - 12:15 › Measurement of colloid concentration in drops using the time-shift technique - Lingxi Li, Institute of Fluid Mechanics and Aerodynamics, Technische Universität Darmstadt  
12:15 - 12:35 › Liquid spray injection in the expansion volume of a CO2 high voltage circuit breaker - Paolo ERRANTE, SuperGrid Institute, Laboratoire de Mécanique des Fluides et d'Acoustique  
12:55 - 14:15 Lunch  
12:55 - 14:15 Poster Session - Poster Session in Patio 44-55  
14:15 - 15:35 Experimental techniques - I - ESR - Christopher Powell & Guillaume Legros  
14:15 - 14:35 › Substance related investigation of the evaporation characteristics of free falling alkane-ethanol droplets using Raman spectroscopy - Thomas Hillenbrand, Chair of Engineering Thermodynamics and Transport Processes (LTTT), Bayreuth Engine Research Center (BERC), University of Bayreuth  
14:35 - 14:55 › Development and calibration of the LASER Pattern Shift Method for measuring the lamella topology during drop impact on walls - Patrick Foltyn, Institute of Aerospace Thermodynamics, University of Stuttgart  
14:55 - 15:15 › 3D surface reconstruction of liquid structures in sprays using structured illumination and phase demodulation - Adrian Roth, Lund University, Department of Physics, Division of Combustion Physics, Lund, Sweden  
15:15 - 15:35 › Fragmentation of a liquid metal jet into water - Nicolas Rimbert, Laboratoire dÉnergétique et de Mécanique Théorique Appliquée  
14:15 - 15:55 Automotive - II - ESR - Camille Hespel & Chaouki Habchi  
14:15 - 14:35 › Effect of Diesel injection pressures up to 450MPa on in-nozzle flow using realistic multicomponent surrogates - Alvaro Vidal, City University London  
14:35 - 14:55 › Spray characteristics of air-assisted urea-SCR sprays of sub-atmospheric temperatures - Aniket P. Kulkarni, College of Engineering Design and Physical Sciences, Brunel University London,  
14:55 - 15:15 › Locally variable turbulent Prandtl number considerations on the modeling of liquid rocket engines operating above the critical point - Leandro Magalhães, University of Beira Interior [Portugal], LAETA\UBI_AEROG-Aeronautics and Astronautics Research Center  
15:15 - 15:35 › Spray-wall interaction: study of preferential vaporization of fuel film as function of injection pressure and wall temperature - Anthony Oswaldo Roque Ccacya, Université dÓrléans  
15:35 - 15:55 › Evaluation of breakup models for marine diesel spray simulations - Haohan Li, Ghent University  
14:15 - 15:55 Combustion - I - ESR- Gilles Bruneaux & Christine Mounaïm-Rousselle  
14:15 - 14:35 › Comparison of the spray combustion characteristics of octanal and diesel - Irene Ruiz, Brunel University London  
14:35 - 15:55 › Multi-scale powder dispersal solution using the General Dynamic Equation - Amir Shalel, Safety and Management Engineering Unit, Ben-Gurion University of the Negev  
14:55 - 15:15 › Influence of precursor concentration on spray and particle formation in flame spray pyrolysis - Malte Bieber, Institute of Heat and Mass Transfer, RWTH Aachen University  
15:15 - 15:35 › Study about the influence of an automatic meshing algorithm on numerical simulations of a gaseous-fueled Lean Direct Injection (LDI) gas turbine combustor in non-reactive conditions - Mario Belmar-Gil, Universitat Politècnica de València  
15:55 - 16:20 Coffee break  
16:20 - 17:40 Atomizers - VII - Marco Marengo & Davide Zuzio  
16:20 - 16:40 › Increasing the Predictive Character of Spray Process Simulation by Multiphase Model Transitioning - Jochen Schütze, ANSYS Germany GmbH  
17:20 - 17:40 › X-ray Characterization and Spray Measurements of ECN Spray G Using Alternative Fuels at Flashing Conditions - Brandon Sforzo, Argonne National Laboratory  
16:20 - 17:40 Droplet - Numerical - VI - Stéphane Popinet & Nicolas Rimbert  
16:20 - 16:40 › Analytical modelling of heating and evaporation of drop clouds with temperature dependent gas properties - Simona Tonini, University of Bergamo  
16:40 - 17:00 › Recent developments in gas-droplet flow simulations based on the Fully Lagrangian Approach - Oyuna Rybdylova, School of Computing, Engineering and Mathematics  
17:00 - 17:20 › New approaches to hydrodynamic modelling of the heating and evaporation of droplets and liquid films - Sergei Sazhin, University of Brighton  
17:20 - 17:40 › Direct numerical simulation of drop impact on superhydrophobic patterned surfaces using the VoF method - Martina Baggio, University of Stuttgart  
16:20 - 17:40 Atmospheric, agricultural and medical sprays - Volfango Bertola & Nwabueze Emekwuru  
16:20 - 16:40 › Atomization of two colliding micro liquid jets in a respiratory inhaler: A computational study - Mahdi Saeedipour, Johannes Kepler University Linz [linz]  
16:40 - 17:00 › Influence of coaxial nozzle design on atomization of cell suspensions and cell survival rate - Georg Möller, Institute of Heat and Mass Transfer, RWTH Aachen University  
17:00 - 17:20 › Self-similar flow field of consumer sprays - Hannes Hinterbichler, Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology  
17:20 - 17:40 › A modified Young-Laplace approach to dynamic wetting of dilute polymer solutions - Volfango Bertola, Laboratory of Technical Physics, School of Engineering, University of Liverpool  
17:00 - 18:30 Chairmans' Award Committee - Award for Best Presentation/Paper (Room Paul Germain)  
19:00 - 23:00 Gala Dinner
 

Wednesday, September 4, 2019

Time Event  
09:00 - 09:45 Keynote Lecture - From Fuel to Power (and Emissions): A numerical journey though automotive injection and combustion systems - Heinz Pitsch, Institut für Technische Verbrennung, RWTH Aachen University, Aachen, Germany  
09:50 - 10:50 Atomizers - VIII - Eran Sher  
09:50 - 10:10 › Nucleation inception temperature in boiling due to rapid heating - A universal correlation - Tali Bar-Kohany, Tel-Aviv University& nrcn - Yarden Amsalem, Tel-Aviv University& nrcn  
10:10 - 10:30 › Criteria for Homogeneous Flash Boiling Atomization: An Experimental Approach - Yahav Moshkovich, Technion - Israel Institute of Technology [Haifa]  
10:30 - 10:50 › Experimental study of the dispersion of a fire suppression agent through a real size nozzle of an aircraft cargo cabin extinguisher system - Pedro Marti-Aldaravi, Universitat Politecnica de Valencia  
09:50 - 10:50 Droplet - Numerical - VII - Christophe Dumouchel  
09:50 - 10:10 › Coupled Level set moment of fluid method for simulating multiphase flows - Anirudh Asuri Mukundan, Complexe de recherche interprofessionnel en aérothermochimie  
10:10 - 10:30 › Multiple fuel droplets evaporation effects on ambient conditions - João Marcelo Vedovoto, Federal University of Uberlândia  
10:30 - 10:50 › Investigation of vorticity production mechanisms in liquid atomization processes - daniel fuster, Institut D'Alembert  
09:50 - 10:30 Experimental techniques - II - Jan Jedelsky  
09:50 - 10:10 › Uncertainty Assessment of Calibrated Structured Planar LIF/Mie Ratio-metric Imaging - Andrew Corber, National Research Council of Canada - Patrizio Vena, National Research Council of Canada - Wajid Chishty, National Research Council of Canada  
10:10 - 10:30 › Spray Visualization of an Urea Injector in the Deposit Tests of a Heavy-duty ATS System - HANDE BEZCI ZEREN, Ford OTOSAN  
10:50 - 11:15 Coffee break  
11:15 - 12:55 Droplet - Numerical - VIII - Udo Fritsching & Jérôme Hélie  
11:15 - 11:35 › Viscous droplet breakup in narrow pore systems - Tobias Wollborn, Leibniz Institute for Materials Engineering - IWT; Particles and Process Engineering, University of Bremen  
11:35 - 11:55 › Probing liquid atomization using probability density functions, volume-based scale distributions and differential geometry - Fabien Thiesset, Complexe de recherche interprofessionnel en aérothermochimie  
11:55 - 12:15 › Numerical Simulation of Droplet Breakup when Impacting a Narrow Gap - Anastasios Georgoulas, Advanced Engineering Centre, School of Computing Engineering and Mathematics, University of Brighton  
12:15 - 12:35 › Understanding encapsulation: a simplified approach using drop impact onto a solid sphere - Marco Marengo, School of Computing, Engineering and Mathematics  
12:35 - 12:55 › A multi-component real-fluid two-phase flow solver with high-order finite-difference schemes - jianhang wang, IFP Energies nouvelles, Technical University of Munich - Songzhi Yang, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles - Chaouki Habchi, Institut Carnot IFPEN Transports Energie, IFP Energies nouvelles  
11:15 - 12:55 Automotive - III - Frederic Ravet & Russell Fitzgerald  
11:15 - 11:35 › Atomization of a G-DI spray with air dissolved in gasoline and mono-component fuels - Lucio Araneo, Politecnico di Milano [Milan]  
11:35 - 11:55 › Spray cone angle prediction model considering nozzle hole geometry - Ibrahim Najar, Chair of Piston Machines and Internal Combustion Engines, Rostock University  
11:55 - 12:15 › effect of butanol and ABE blend on PRF80 spray behavior - Christine MOUNAÏM-ROUSSELLE, Laboratoire PRISME  
12:35 - 12:55 › Study on the Spray Dynamics and Sectional Spray Distribution using Spray Pattern Measurement of Multi-Hole GDI Injector - Jeonghyun Park, Graduate School of Chonnam National University  
11:15 - 12:55 Exibitors presentations - DANTEC, LAVISION, OXFORD LASER, TSI, A2
 
12:55 - 14:15 Lunch  
14:15 - 15:35 Atomizers - IX - Jean-Bernard Blaisot & Alessandro Montanaro  
14:15 - 14:35 › Real-size Real-shape Real-pressure transparent nozzles to contribute to nozzle design and cavitation control for GDI - jerome helie, CPT France SAS  
14:35 - 14:55 › Towards lattice Boltzmann simulation of flow dynamics inside a model fuel injector: a first-stage study - TIANPEI LUO, Beijing Engineering Research Center of Aerospace Testing Technology and Equipment, Beijing 100074, China, Department of Mechanical and Aerospace Engineering & Institute of Energy Futures, Brunel University London, Uxbridge UB8 3PH, UK, Beijing Institute of Aerospace Testing Technology, Beijing 100074, China  
14:55 - 15:15 › Entropy-based cavitation and primary atomization analysis with a 2D transparent injector - Jean-Bernard Blaisot, Complexe de recherche interprofessionnel en aérothermochimie  
15:15 - 15:35 › Experimental investigation of spillback nozzle performance via pulsating LED shadowgraphy. - Giovanni Cafaggi, DTU Chemical Engineering  
14:15 - 15:55 Automotive - IV - João Marcelo Vedovoto & Robert M. Mcdavid  
14:15 - 14:35 › Very High-Pressure Sprays of Gasoline from a GDI Multi-hole Injector - Alessandro Montanaro, Istituto Motori, National Research Council  
14:35 - 14:55 › Large-eddy simulation of turbulent cavitating flow in a Diesel injector including needle movement, in OpenFOAM® - KONSTANTINOS KOLOVOS, 1Perkins Engines Company Ltd  
14:55 - 15:15 › A Methodology for the hydraulic characterization of a Urea-Water Solution injector by means of Spray Momentum Measurement - Raul Payri, Universitat Politecnica de Valencia  
15:15 - 15:35 › 3D Measurements of the Geometry, Internal Flow and Emerging Fuel Jet from the ECN Spray C Injector - Christopher Powell, Argonne National Laboratory  
15:35 - 15:55 › Large eddy simulation of high-pressure ECN Spray A with the focus on the influence of injection pressure - Fatemeh Salehi, School of Engineering, Macquarie University  
14:15 - 15:35 Combustion - II - Eva Gutheil & Salvador Navarro-Martinez  
14:15 - 14:35 › Effect of Spray Bulging on Ignition of High Pressure Diesel Sprays - Madan Mohan Avulapati, Indian Institute of Technology Tirupati  
14:35 - 14:55 › Study on large-scale ignition in flame spread of randomly distributed droplet cloud near group-combustion-excitation limit in microgravity - kodai matsumoto, Graduate School of Sciences and Technology for Innovation, Yamaguchi University  
15:15 - 15:35 › Closure of the Scalar Dissipation Rate in the Spray Flamelet Equations - Hernan Olguin, Universidad Tecnica Federico Santa Maria [Valparaiso]  
15:55 - 16:20 Coffee break  
16:20 - 17:40 Atomizers - X - Raffaele Ragucci & Daniel Fuster  
16:20 - 16:40 › Enhancement of the Madabhushi Liquid Jet in Crossflow Breakup Model by a Ligament Breakup Mechanism - Markus Lambert, ANSYS Germany GmbH  
17:00 - 17:20 › A surface resolution criterion for two-phase flows DNS - Romain Canu, COmplexe de Recherche Interprofessionnel en Aérothermochimie  
17:20 - 17:40 › Large Eddy Simulation of Multi-Component Mixing Layers at High-Pressure Conditions - Dennis Kuetemeier, Technische Universität Darmstadt, Energy and Power Plant Technology  
16:20 - 17:40 Automotive - V - Guillaume Legros & Fabrice Lemoine  
16:20 - 16:40 › Impact of multiple injections on adBlue Spray Decomposition in a SCR-like system using Large Eddy Simulation - Kaushal Nishad, Institute of Energy and Power Plant Technology, Technische Universität Darmstadt,  
16:40 - 17:00 › Characterization of Air Entrainment and Mixture Formation Processes of Multi-Hole Injector Spray for Diesel Engine: Comparison with Single-Hole Injector - Shinichi Kakami, Department of Mechanical System  
17:00 - 17:20 › Experimental Investigation of the Effect of Surface Geometry on Spray Impingement and Its Macroscopic Behaviour - Christoph Steinberg, Shanghai Jiao Tong University [Shanghai]  
17:20 - 17:40 › A novel discrete phase solver for high-speed spray simulations in industrial applications - Marcel Divis, Ricardo Software, Ricardo Prague s.r.o  
17:20 - 17:40 › Propane/diesel mixed fuels spray angle investigation in the near-nozzle field via high-speed imaging - Luigi Sequino, ISTITUTO MOTORI - CNR